Tattoo removal machine operation method

- Apr 16, 2018-

1. Power supply:

Connect the power cord to the power supply.

2. Open the machine:

Make sure the button on the emergency stop is up.

Insert the key into the lock switch and turn it into the boot state. This time the pump is running and the system is in standby mode.

3. Laser output:

Press the first button to start the system into the ready state.

Select 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 Hz to the appropriate degree.

Press the second third button to adjust the energy to the appropriate level.

When the gun is pointed at the treated part, the laser will be output by stepping on the foot, and the laser will stop when the pedal is released.

Note when the system is in working status, avoid the spear on the dangerous parts (such as the human eye) in order to avoid accidentally stepped on foot, laser output caused by accident, left foot first when each treatment.

4. Turn it off

Press the first button to show that the machine is ready to be turned to standby, leaving the system in standby mode and shutdown after 30 seconds.

Turn off the lock switch.

Unplug the power cord and turn off the power.

【Note】 it is strictly prohibited to replace the bald head when the system is in working condition.